MacRoy Posted March 7, 2015 Share Posted March 7, 2015 (edited) Hi! I do not see orders when I click on the icon above. I just get a blank page that looks like this: https://www.???.se/admin/index.php?controller=AdminOrders&token=e440eeb817a2654da706de8b354fd7b7 I have a new installation of Prestashop 1.6.0.14! Do you have any tips, or is it more a me who encountered this? Best regards MacRoy Edited March 10, 2015 by MacRoy (see edit history) Link to comment Share on other sites More sharing options...
Rundblick Posted March 7, 2015 Share Posted March 7, 2015 you cannot link pages from you backoffice, please use a screenshot to show us something Link to comment Share on other sites More sharing options...
MacRoy Posted March 7, 2015 Author Share Posted March 7, 2015 you cannot link pages from you backoffice, please use a screenshot to show us something Hi! There is not much to see! I just get a blank screen. This is obviously not my real link that I show here that you understand ! Best regards MacRoy Link to comment Share on other sites More sharing options...
MacRoy Posted March 8, 2015 Author Share Posted March 8, 2015 Here is the error report Parse error: syntax error, unexpected end of file in /var/www/override/controllers/admin/AdminOrdersController.php on line 193 What could be wrong ? I have deleted the file class_index.php and emptied the cache! Best regards MacRoy Link to comment Share on other sites More sharing options...
El Patron Posted March 8, 2015 Share Posted March 8, 2015 Hi MacRoy, so you want us to count down the code you pasted to line 193? Fred Link to comment Share on other sites More sharing options...
MacRoy Posted March 8, 2015 Author Share Posted March 8, 2015 (edited) Hi El Patron! Oh no! It is the last line you see before my comment! But thanks for your reply and I hope you have an answer! ? Best regards MacRoy Edited March 8, 2015 by MacRoy (see edit history) Link to comment Share on other sites More sharing options...
El Patron Posted March 8, 2015 Share Posted March 8, 2015 Hi El Patron! Oh no! It is the last line you see before my comment! But thanks for your reply and I hope you have an answer! ? Best regards MacRoy Yes well I still don't see your comment...your url looks rather odd I suppose you change it. here is 16014 demo shop, in demo mode, with debug enabled. Please test here to see if same issue. http://16014.etiendas.co/admin16014 login: [email protected] pwd: demodemo Link to comment Share on other sites More sharing options...
El Patron Posted March 8, 2015 Share Posted March 8, 2015 you must have loaded a module override/controllers/admin/AdminOrdersController.php there is no AdminOrdersController.php in that override position in fresh installation. http://screencast.com/t/yBiNYa6sAF Link to comment Share on other sites More sharing options...
bellini13 Posted March 8, 2015 Share Posted March 8, 2015 (edited) you have an override installed, which appears to be from the printshippinglabelspro module. I would suggest deleting the module folder(from ftp), removing any of the overrides, and then contacting the module author. Edited March 8, 2015 by bellini13 (see edit history) Link to comment Share on other sites More sharing options...
MacRoy Posted March 8, 2015 Author Share Posted March 8, 2015 Hi! Bellini13 Do you have experience it yourself? Print Shipping Label Pro? Has it caused problems for you as well? I will make a clean new ainstallation of the latest PS 1.6.0.14 tomorrow! Dare I install the module Print Chipping Label Pro? Best regards MacRoy Link to comment Share on other sites More sharing options...
bellini13 Posted March 8, 2015 Share Posted March 8, 2015 I don't, but the addons page says it is not compatible with PS v1.6.0.14. It stops at .13 Have you tried to delete the module and the overrides and then re-install it? Perhaps the upgrade broke the module Also, why not post the actual error you received after enabling debug mode? No one wants to read your override code, especially in the format you provided it in Link to comment Share on other sites More sharing options...
MacRoy Posted March 8, 2015 Author Share Posted March 8, 2015 (edited) I don't, but the addons page says it is not compatible with PS v1.6.0.14. It stops at .13 Have you tried to delete the module and the overrides and then re-install it? Perhaps the upgrade broke the module Also, why not post the actual error you received after enabling debug mode? No one wants to read your override code, especially in the format you provided it in Hi! Had the same problem with PS 1.6.0.13 Yes, I have. Here it is: Parse error: syntax error, unexpected end of file in /var/www/override/controllers/admin/AdminOrdersController.php on line 193 Shall make a brand new clean install of PS 1.6.0.14 to see if it gets better. The former I did was with PS 1.6.0.13 and updating it! Best regards MacRoy Edited March 8, 2015 by MacRoy (see edit history) Link to comment Share on other sites More sharing options...
El Patron Posted March 8, 2015 Share Posted March 8, 2015 I have updated subject topic with ' Print Shipping Label Pro'. You started topic stating fresh load of 1.6.0.14, this makes us assume initially that it is a native issue. It would be best in the future to state fresh load then loaded module etc. This will allow community to better help. When you get blank screen make sure to turn on errors and get the information into the original topic. Happy PrestaShopping. Link to comment Share on other sites More sharing options...
MacRoy Posted March 8, 2015 Author Share Posted March 8, 2015 Hi! I wrote a new installation! But are you sure that it is Print Chipping Label causing it all? I'm working on a new clean install of PS 1.6.0.14 and will install module for module to see where it goes wrong. I will keep you updated. Personally, I do think that it has to do with the Print Shipping Label Pro! We'll see ... Best regards MacRoy Link to comment Share on other sites More sharing options...
bellini13 Posted March 8, 2015 Share Posted March 8, 2015 The override code you provided earlier had 'printshippinglabelspro' all over the code. But it is your store, we have no idea exactly what you have done, so only you can answer that. Link to comment Share on other sites More sharing options...
El Patron Posted March 8, 2015 Share Posted March 8, 2015 Hi! I wrote a new installation! But are you sure that it is Print Chipping Label causing it all? I'm working on a new clean install of PS 1.6.0.14 and will install module for module to see where it goes wrong. I will keep you updated. Personally, I do think that it has to do with the Print Shipping Label Pro! We'll see ... Best regards MacRoy yes well you might think this...but the support here given information has been benevolent. I like those three post topics, op, answer, thank you, marked solved. this is done by providing as much useful information in the op...else it turns into a chat room and I personally am not looking for a bromance. It is proven you have bad module, contact developer. Link to comment Share on other sites More sharing options...
MacRoy Posted March 10, 2015 Author Share Posted March 10, 2015 Hi! I can now confirm what you have said is true! Although today I got an updated version of the Print Shipping Label Pro 3.6.0! Despite this, it will not work. Best regards MacRoy Link to comment Share on other sites More sharing options...
MacRoy Posted March 10, 2015 Author Share Posted March 10, 2015 (edited) When I activate the Disable all bypasses, it works! What can you do to avoid this? And I do not mean that I will activate this function, then it does not work with other modules either. Do you have a tip? Regards MacRoy Edited March 10, 2015 by MacRoy (see edit history) Link to comment Share on other sites More sharing options...
moy2010 Posted March 10, 2015 Share Posted March 10, 2015 The bypasses or overrides are files installed by your modules that override a certain class, controller, etc. If it works once you disable all bypasses, it means that your module is not fully functional yet. The override is still causing a conflict somewhere. Link to comment Share on other sites More sharing options...
vivacityinfotech Posted September 11, 2015 Share Posted September 11, 2015 i have shop this version runing here [link removed due to spam reasons] version (PrestaShop™ 1.6.0.14). I recently buy your module and having some issue. In backend while exporting PDF I am getting some JSON error of javascript, so cant use your module, please can you help me with this, i have attached the console log. i am geting this error if (typeof(res.response) != 'undefined') or TypeError: res is null if (typeof(res.response) != 'undefined') [link removed due to spam reasons] Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts