Tomin Posted January 7, 2015 Share Posted January 7, 2015 Hey, great news - 1.6.0.11 live and available! Thanks to all doing all bug reports and improvements. But will it blend? Link to comment Share on other sites More sharing options...
Kstyle001 Posted January 7, 2015 Share Posted January 7, 2015 Good question. Anyone brave enough here that already tried it? Link to comment Share on other sites More sharing options...
Rolige Posted January 7, 2015 Share Posted January 7, 2015 I think the answer is "yes", but, if you have a customized theme, maybe you can have some errors, because if you see the changelog will see a lot of fixes on the Front Office, also have an important improved in the taxes and specific price reductions. 3 Link to comment Share on other sites More sharing options...
doekia Posted January 7, 2015 Share Posted January 7, 2015 Brand new install and pile of bug!! totally unusable - period Link to comment Share on other sites More sharing options...
El Patron Posted January 7, 2015 Share Posted January 7, 2015 Brand new install and pile of bug!! totally unusable - period Please 'try' to be constructive. I understand this may be a bit difficult for you but as far as I'm concerned this type of post is borderline abuse and certainly non-productive. If this is not possible then please keep to the French forum as they may be more tolerant of this sort of behavior, you know I am not. 7 Link to comment Share on other sites More sharing options...
mytheory. Posted January 8, 2015 Share Posted January 8, 2015 Hi, Just upgraded... we recently upgraded from 1.5 to 1.6 at the end of last year. Then they released this version today, so we figured we might as well update it again while we were still tweaking the site. First, time the upgrade process (automatic) got stuck during the database process. Used a backup, and ran it again without any other changes and it was successful. Everything seems to be working fine so far. Nothing major for us. But keep in mind we havent had a whole lot of time to test 1.6. Custom theme works, front office seems normal (or as before), backoffice is good... can't tell a major difference but everything seems to be fine. We had 1 minor issue with a third-party module... it was a slider but it saved our uploaded images into the "upload" folder. But for some reason any attempts to access the image would show an image of "?" We noticed the new version included a new .htaccess file in this folder. We removed it and it works again. FYI. Set our site to live and browsing and ordering process is working too. Obviously we will test further but so far so good. 3 Link to comment Share on other sites More sharing options...
Tomin Posted January 8, 2015 Author Share Posted January 8, 2015 (edited) There is some issues with breadcrumbs on category and product pages even on default theme - checked Opera, Chrome and Firefox checked few 1.6.0.9 compatible themes on fresh installation - got some smarty errors and themes wasn't displayed. SO DON'T UPGRADE LIVE SHOP AND MAKE BACKUPS! Check you theme and custom compatibility local, offline or on subdomain just to avoid topics - my shop is gone, no backups, what to do now? Edited January 8, 2015 by Tomin (see edit history) 1 Link to comment Share on other sites More sharing options...
Totti Posted January 8, 2015 Share Posted January 8, 2015 Unfortunately the update of the default themes not really a big deal and a big limitation. Link to comment Share on other sites More sharing options...
mytheory. Posted January 8, 2015 Share Posted January 8, 2015 There is some issues with breadcrumbs on category and product pages even on default theme - checked Opera, Chrome and Firefox checked few 1.6.0.9 compatible themes on fresh installation - got some smarty errors and themes wasn't displayed. SO DON'T UPGRADE LIVE SHOP AND MAKE BACKUPS! Check you theme and custom compatibility local, offline or on subdomain just to avoid topics - my shop is gone, no backups, what to do now? Yes, always make backups. I always make backups of my img folder and database. I also have at least 1-2 other backups running on the server side too. As for your issue, I'm not experiencing any of those issues. However, I am not using the default theme. But the theme I am using wasn't built specifically for 1.6.0.11... the last update was for 1.6.0.9. However, everything works fine so far. When I first upgraded it defaulted to the default theme... my frontend loaded a blank page. But I cleared cache and it loaded fine; I did this for my custom theme as well. I also always try to run it in chrome in incognito mode to make sure it just the cache issue. One other thing I noticed was that for my custom theme and modules some items weren't loading; no errors just not present. I digged through the settings and realized that for some reason the upgrade process disabled the override option under the Advance Parameters > Performance settings. I set it to NO and my custom overrides loaded fine. HTH! Link to comment Share on other sites More sharing options...
Totti Posted January 8, 2015 Share Posted January 8, 2015 As for me, but after the upgrade I have problems viewing the modules. Link to comment Share on other sites More sharing options...
nnab Posted January 8, 2015 Share Posted January 8, 2015 (edited) I too upgraded from 1.6.0.8 to 1.6.0.11 now. Upgrade is successful thro 1 click. All 3rd party modules are disabled and now js also not working so unable to get sub links from breadcrumps. What to do? Edited January 8, 2015 by nnab (see edit history) 1 Link to comment Share on other sites More sharing options...
Rolige Posted January 9, 2015 Share Posted January 9, 2015 As for me, but after the upgrade I have problems viewing the modules. I too upgraded from 1.6.0.8 to 1.6.0.11 now. Upgrade is successful thro 1 click. All 3rd party modules are disabled and now js also not working so unable to get sub links from breadcrumps. What to do? Try deleting all the cache and cookies. Link to comment Share on other sites More sharing options...
Totti Posted January 9, 2015 Share Posted January 9, 2015 is the first thing I did, but unfortunately without results, the problem occurs only on modules unofficial. Link to comment Share on other sites More sharing options...
roo10 Posted January 9, 2015 Share Posted January 9, 2015 (edited) I did fresh installation of PS 1.6.0.11 on localhost and have got 2 problems mentioned below. 1. The slider for "Price" range filter is missing in left column in Layered Navigation module (v2.0.6). 2. The "Add to compare" feature is not working for products on category pages. Please reply if anyone has the solution. Edited January 9, 2015 by roo10 (see edit history) 2 Link to comment Share on other sites More sharing options...
Tanatus Posted January 9, 2015 Share Posted January 9, 2015 Have many errors with dropdowns and tabs in admin backoffice. Link to comment Share on other sites More sharing options...
El Patron Posted January 9, 2015 Share Posted January 9, 2015 Have many errors with dropdowns and tabs in admin backoffice. I have opened forge report http://forge.prestashop.com/browse/PSCSX-4259 If you have issue please 1) open a forge report and 2) new topic. Happy PrestaShopping. Link to comment Share on other sites More sharing options...
ringerce Posted January 9, 2015 Share Posted January 9, 2015 (edited) I've successfully upgrade two stores to 1.6.0.11 from 1.5.4.1 and 1.6.0.9. My process is a little more involved though. I download the production versions of my sites to my local dev server. Perform the upgrade via the 1-Click module then I do a schema comparison against a fresh install of 1.6.0.11 using SQLYog to cleanup anything that the upgrade may have missed. Aside from obvious template changes I haven't come across any site breaking bugs *yet*. A few minor bugs but that's to be expected with Prestashop being open source and all. Edited January 9, 2015 by ringerce (see edit history) 1 Link to comment Share on other sites More sharing options...
wakabayashi Posted January 9, 2015 Share Posted January 9, 2015 I haven't tested much yet, but it seems to be quite a good update. Our tax problems seem to be resolved and that is or hopefully was a big issue! I use my own theme and it didnt make a lot of problems. The update process is always a bit annoying since all my modules are deactivated and standard theme is being taken after update. Is there a possibility, that after an update all the modules are activated as before? Is it possible that an update doesnt change the used theme? I only noticed one problem. My price slider is now more working. It doesn't show up. Does anybody have the same problem? Maybe its because of my theme, but no idea why this should be :S In short: It's a good update. Not a lot new features, but a lot of fixes and that is at the moment the most important for Prestashop! 1 Link to comment Share on other sites More sharing options...
Tanatus Posted January 9, 2015 Share Posted January 9, 2015 Have many errors with dropdowns and tabs in admin backoffice. The problem was solved. It was a server side issue in my case. 1 Link to comment Share on other sites More sharing options...
mytheory. Posted January 9, 2015 Share Posted January 9, 2015 Hi, Again, if you are having issues with third party modules make sure to check the "Debug" section under "Advanced Parameters" > "Performance" Make sure that the "Disable overrides" is set to NO. This is becuase many third-party modules use overrides, but if this is enabled then PS will ignore all those overrides. HTH! Link to comment Share on other sites More sharing options...
roo10 Posted January 10, 2015 Share Posted January 10, 2015 I did fresh installation of PS 1.6.0.11 on localhost and have got 2 problems mentioned below. 1. The slider for "Price" range filter is missing in left column in Layered Navigation module (v2.0.6). 2. The "Add to compare" feature is not working for products on category pages. Please reply if anyone has the solution. Can anyone please confirm if they are facing these 2 issues or not? 1 Link to comment Share on other sites More sharing options...
sjaakie3 Posted January 10, 2015 Share Posted January 10, 2015 I seriously wonder why the values for rounding off the numbers are set so stupidly straight after the update. Does nobody think this sort of thing through? This is my 100th time I am very disappointed in the presta 'team'. (Sorry Vekia, you seem to be doing all the good work here) Link to comment Share on other sites More sharing options...
Tanatus Posted January 10, 2015 Share Posted January 10, 2015 Can anyone please confirm if they are facing these 2 issues or not? I have such problems. 1 Link to comment Share on other sites More sharing options...
sjaakie3 Posted January 10, 2015 Share Posted January 10, 2015 1. The slider for "Price" range filter is missing in left column in Layered Navigation module (v2.0.6). Mine was not a fresh install but an upgrade from 1.6.0.9 But the slider in the layered navigation is gone here too. I can add products to the compare thingy, that works here. Link to comment Share on other sites More sharing options...
wakabayashi Posted January 10, 2015 Share Posted January 10, 2015 I seriously wonder why the values for rounding off the numbers are set so stupidly straight after the update. Does nobody think this sort of thing through? This is my 100th time I am very disappointed in the presta 'team'. (Sorry Vekia, you seem to be doing all the good work here) Could you explain in more detail what you mean with the rounding? Link to comment Share on other sites More sharing options...
sjaakie3 Posted January 10, 2015 Share Posted January 10, 2015 Could you explain in more detail what you mean with the rounding? When I upgraded and looked at the store all the amounts were without decimals, ie 5 in stead 5.95 Looking in the BO I saw the new settings and noticed that these didn't pick my old settings, but were set at the non decimal setting. Link to comment Share on other sites More sharing options...
wakabayashi Posted January 10, 2015 Share Posted January 10, 2015 When I upgraded and looked at the store all the amounts were without decimals, ie 5 in stead 5.95 Looking in the BO I saw the new settings and noticed that these didn't pick my old settings, but were set at the non decimal setting. Hm strange. I haven't had this problem. It was set by default to 2 decimals :S Link to comment Share on other sites More sharing options...
mathouse Posted January 10, 2015 Share Posted January 10, 2015 (edited) Mine was not a fresh install but an upgrade from 1.6.0.9 But the slider in the layered navigation is gone here too. I can add products to the compare thingy, that works here. Same here. Upgraded from 1.6.0.9 to 1.6.0.11 No issues except missing prices navigation in block layered. Other sections of BL are working fine. Edited January 10, 2015 by mathouse (see edit history) Link to comment Share on other sites More sharing options...
Proetorian Posted January 10, 2015 Share Posted January 10, 2015 I did fresh installation of PS 1.6.0.11 on localhost and have got 2 problems mentioned below. 1. The slider for "Price" range filter is missing in left column in Layered Navigation module (v2.0.6). 2. The "Add to compare" feature is not working for products on category pages. Please reply if anyone has the solution. I am still running 1.6.0.9 and the products-comparison (Add to Compare) is not working in 1.6.0.9 either. I get a HTTP-500 Internal Server error. The slider for "Price" range filter in the Layered Navigation module (v2.0.6) does work in 1.6.0.9 I am going to upgrade to 1.6.0.11 tonight and start testing. Link to comment Share on other sites More sharing options...
Proetorian Posted January 11, 2015 Share Posted January 11, 2015 I am still running 1.6.0.9 and the products-comparison (Add to Compare) is not working in 1.6.0.9 either. I get a HTTP-500 Internal Server error. The slider for "Price" range filter in the Layered Navigation module (v2.0.6) does work in 1.6.0.9 I am going to upgrade to 1.6.0.11 tonight and start testing. After installing 1.6.0.11 and doing some limited testing, it seems the only issue I am encountering are the same 2 as roo10 indicated above. Note that I already had a problem with the products-comparison feature in 1.6.0.9 Link to comment Share on other sites More sharing options...
roo10 Posted January 11, 2015 Share Posted January 11, 2015 I did fresh installation of PS 1.6.0.11 on localhost and have got 2 problems mentioned below. 1. The slider for "Price" range filter is missing in left column in Layered Navigation module (v2.0.6). 2. The "Add to compare" feature is not working for products on category pages. Please reply if anyone has the solution. Has anyone opened the forge report for above 2 problems? If yes, please post the link. Link to comment Share on other sites More sharing options...
Proetorian Posted January 11, 2015 Share Posted January 11, 2015 Has anyone opened the forge report for above 2 problems? If yes, please post the link. http://forge.prestashop.com/browse/PSCSX-4273 Link to comment Share on other sites More sharing options...
LucaPresta Posted January 11, 2015 Share Posted January 11, 2015 Hi, I've upgraded from 1.6.0.9 to 1.6.0.11. Now, if I I don't deactivate override and module not native there is an issue when I checkout a product (the issue arise in the fast check out from home list, but also from the detailed product page). Print screen in attachment. Don't now which is the module (I can't find any error on server log). Now I've restored the 1.6.0.9. Thank you in anticipation. Luca Link to comment Share on other sites More sharing options...
wakabayashi Posted January 11, 2015 Share Posted January 11, 2015 Has anyone opened the forge report for above 2 problems? If yes, please post the link. I reported the problem with the pricefilter some days ago: http://forge.prestashop.com/browse/PSCSX-4265?jql=project%20%3D%20PSCSX The product comparision works fine for me an all my installations... What is not working for you there? Link to comment Share on other sites More sharing options...
roo10 Posted January 11, 2015 Share Posted January 11, 2015 (edited) I reported the problem with the pricefilter some days ago: http://forge.prestashop.com/browse/PSCSX-4265?jql=project%20%3D%20PSCSX The product comparision works fine for me an all my installations... What is not working for you there? I did clean installation of PS 1.6.0.11 twice on localhost and both times, I faced those 2 problems. Regarding the product compare, nothing (no activity) happens after clicking on "Add to compare". It was working fine for me on PS 1.6.0.9. Edited January 11, 2015 by roo10 (see edit history) Link to comment Share on other sites More sharing options...
wakabayashi Posted January 11, 2015 Share Posted January 11, 2015 I did clean installation of PS 1.6.0.11 twice on localhost and both times, I faced those 2 problems. Regarding the product compare, nothing (no activity) happens after clicking on "Add to compare". It was working fine for me on PS 1.6.0.9. Can you please give me a link of your clean installation of 1.6.0.11? I believe its working, but they user design is not so clever done... Link to comment Share on other sites More sharing options...
Proetorian Posted January 11, 2015 Share Posted January 11, 2015 I did clean installation of PS 1.6.0.11 twice on localhost and both times, I faced those 2 problems. Regarding the product compare, nothing (no activity) happens after clicking on "Add to compare". It was working fine for me on PS 1.6.0.9. Further clarification regarding the Product Comparison function: I tried it in IE and Chrome. I get a HTTP 500 error in IE and a blank screen in Chrome. Link to comment Share on other sites More sharing options...
selectshop.at Posted January 12, 2015 Share Posted January 12, 2015 Fresh install in 3 languages no problems with it. For upgraded shops, please see here my experiences. I've also upgrade not only the test/default shops, but 2 live shops in German without any problems. Only the one in Portuguese language default shop is making troubles. Well as it is only a demo I will install it for new, cause all what I changed is not changing that the shop is buggy. http://www.prestashop.com/forums/topic/393769-1611-no-module-titles-anymore-and-no-text-in-module/?do=findComment&comment=1922674 Link to comment Share on other sites More sharing options...
selectshop.at Posted January 12, 2015 Share Posted January 12, 2015 Further clarification regarding the Product Comparison function: I tried it in IE and Chrome. I get a HTTP 500 error in IE and a blank screen in Chrome. Did you activated debug modus ? 500 errors are server errors. You will find more information on the server logs, or by activating debug-modus and constructing the same problem again by verifying if there are some more informations about the error. Link to comment Share on other sites More sharing options...
bitpixel Posted January 12, 2015 Share Posted January 12, 2015 does rounding work? can you confirm? I cannot make it work no matter what setting i try. Link to comment Share on other sites More sharing options...
Tanatus Posted January 12, 2015 Share Posted January 12, 2015 (edited) Here is the solution for Price scroller and comparison: In file: classes/controller/Controller.php View find: $this->addCSS($ui_path['css'], null, false); change it to: $this->addCSS($ui_path['css'], 'all', false); It seems to work fine. Edited January 12, 2015 by Tanatus (see edit history) 3 Link to comment Share on other sites More sharing options...
Totti Posted January 12, 2015 Share Posted January 12, 2015 Perfect work, the second parameter what is it ? Link to comment Share on other sites More sharing options...
Proetorian Posted January 12, 2015 Share Posted January 12, 2015 Here is the solution for Price scroller and comparison: In file: classes/controller/Controller.php View find: $this->addCSS($ui_path['css'], null, false); change it to: $this->addCSS($ui_path['css'], 'all', false); It seems to work fine. Thank you. That did fix the Price Scroll function. Link to comment Share on other sites More sharing options...
Proetorian Posted January 12, 2015 Share Posted January 12, 2015 The Product Comparison issue is due to a fatal error in the Google Analytics module. As a short-term fix, I disabled the Google Analytics module and now the Product Comparison function works. See below for more details: http://forge.prestashop.com/browse/PSCSX-4273 Link to comment Share on other sites More sharing options...
selectshop.at Posted January 12, 2015 Share Posted January 12, 2015 does rounding work? can you confirm? I cannot make it work no matter what setting i try. I never made any change on this configuration. I'm using standard since years... Link to comment Share on other sites More sharing options...
mathouse Posted January 12, 2015 Share Posted January 12, 2015 Here is the solution for Price scroller and comparison: In file: classes/controller/Controller.php View find: $this->addCSS($ui_path['css'], null, false); change it to: $this->addCSS($ui_path['css'], 'all', false); It seems to work fine. Works! Thank you so much for this fix! Link to comment Share on other sites More sharing options...
stijnmenkehorst Posted January 12, 2015 Share Posted January 12, 2015 As for me, but after the upgrade I have problems viewing the modules. Same thing in my shop. In my shop this issue is only in the SHOPPING FUNCTIONS and SOCIAL category. Same with you? I opened a topic concerning this 'bug' on this forum here --> http://www.prestashop.com/forums/topic/393769-1611-no-module-titles-anymore-and-no-text-in-module/ Link to comment Share on other sites More sharing options...
stijnmenkehorst Posted January 12, 2015 Share Posted January 12, 2015 I upgraded from 1.6.9 to 1.6.11. Upgrade worked first time. Got some issues now though... Not showing certain text in modules in BO (see post above) (500) Internal Server Error when payment provider tries to contact notifyURL when payment is accepted Prestashop as a whole seems alot slower Loading of BO menu is slow Link to comment Share on other sites More sharing options...
cantcloseaccount Posted January 16, 2015 Share Posted January 16, 2015 Thanks for the work on the latest version. I upgraded from 1.6.9 to 1.6.11 and mostly good. Tabs BO left column tabs weren't working when I first logged in, but started working once I refreshed a few pages. MultiStore Multistore was turned off and wasn't being used, but for some reason, the test multistore sites I created some time ago were showing up after upgrade. They had suddenly become active even with Multistore off in the BO. I had to switch MultiStore on and then delete the test multistores and the turn Multistore off again. This could have been an issue carried on from a prior update and only noticed now...(I only found the issue because google had indexed an unusual URL) Geolocation Geolocation seems to be faulty, but I am trying to trouble shoot that and determine if this is an upgrade issue. (was working prior to the upgrade.) Cheers Louis Link to comment Share on other sites More sharing options...
moy2010 Posted January 16, 2015 Share Posted January 16, 2015 For me, it's not worthy. Some 3rd. party modules stopped working once the upgrade was done. IMHO, wait just a couple of weeks for the 1.6.0.12 version. Link to comment Share on other sites More sharing options...
Crazyweb Posted January 16, 2015 Share Posted January 16, 2015 (edited) I'm having problems when adding new products. Products are showing, but after saving the add to cart button disappears and no price or stock is showing. Anyone else with this problem? Assisting products are still showing good and with add to cart button, but once change or save again. Also the same stuff happens Cleared cache, turned on of catalog mode etc, but no results Edited January 16, 2015 by Crazyweb (see edit history) Link to comment Share on other sites More sharing options...
Guest Posted January 16, 2015 Share Posted January 16, 2015 (edited) For me, it's not worthy. Some 3rd. party modules stopped working once the upgrade was done. IMHO, wait just a couple of weeks for the 1.6.0.12 version. The problem with that approach is that you will never update. 1.6.0.12 may well fix some bugs but will inevitably introduce some more bugs. Such is the nature of complex software development Edited January 16, 2015 by Guest (see edit history) Link to comment Share on other sites More sharing options...
Tanatus Posted January 19, 2015 Share Posted January 19, 2015 (edited) Have found new issue. When creating (and may be editting) a category, there is some bug in seo (tags) section of the ategory. If you will type more symbols than acceptable, then you will not be able to save this category. The secrren just reloads and nothing changes. And NO ERROR MESSAGE appears. Experimented with this issue, when all fields are OK, then the category is saved. Can anyone confirm or assist? Edited January 19, 2015 by Tanatus (see edit history) Link to comment Share on other sites More sharing options...
Crazyweb Posted January 19, 2015 Share Posted January 19, 2015 Have you tried to reset the home slider in modules, this sometimes can help Link to comment Share on other sites More sharing options...
Tanatus Posted January 19, 2015 Share Posted January 19, 2015 Have you tried to reset the home slider in modules, this sometimes can help Helped Link to comment Share on other sites More sharing options...
Erik De Martiis Posted January 22, 2015 Share Posted January 22, 2015 (edited) Same problem here for the price slider, solved thanks to Tanatus. The solution New Issue for me: With "Layered navigation block", can't filter for Properties. (Product Features/Properties of demo data of Prestashop) Prestashop hangs on "Loading ... " All the other filters are working. I'm using a fresh prestashop install with data example. (the fashion shop) Any solution? Thanks. Edited January 22, 2015 by Erik De Martiis (see edit history) Link to comment Share on other sites More sharing options...
Erik De Martiis Posted January 22, 2015 Share Posted January 22, 2015 New Issue for me: With "Layered navigation block", can't filter for Properties. (Product Features/Properties of demo data of Prestashop) Prestashop hangs on "Loading ... " All the other filters are working. I'm using a fresh prestashop install with data example. (the fashion shop) Any solution? Thanks. SOLVED The problem was an accented "à" In Italian, "Properties" is "Proprietà", the problem is the "à". So, be careful. This thing can happen for all languages that use accented (and for al filters in the Layered navigation block). Regards Erik Link to comment Share on other sites More sharing options...
Recommended Posts