justbeer Posted September 5, 2013 Share Posted September 5, 2013 Hi .. just upgraded my site to the latest version. I have been unable to access the back end after upgrade as each time I click a tab, I am logged off. Will appreciate any assistance. Thanks. Link to comment Share on other sites More sharing options...
DocG Posted September 5, 2013 Share Posted September 5, 2013 looks like a cookie problem.. Have you seen which cookies are set ? Link to comment Share on other sites More sharing options...
vekia Posted September 5, 2013 Share Posted September 5, 2013 yes it looks like cookie / cache issue. if i were you i will try to: clear browser cache Link to comment Share on other sites More sharing options...
maximo88 Posted September 5, 2013 Share Posted September 5, 2013 I have the same problem. I was stupid upgrading to 1.5.5 I can access using another domain. I have my domain www.comercialandalucia.es But I use www.doodmidewef.factoruadigaitalpremium.es, the domain of the webhost. But this is incredible.It's a fail of 1.5.5 if you upgrade, it doesn't generate good the cookie of domain &ssl. 1 Link to comment Share on other sites More sharing options...
justbeer Posted September 6, 2013 Author Share Posted September 6, 2013 looks like a cookie problem.. Have you seen which cookies are set ? I have cleared cache, used different browsers even computers to no avail. I had a new installation of 1.5.5 in a new directory and same problem occurs. Appreciate any advice .. thanks .. Link to comment Share on other sites More sharing options...
DocG Posted September 6, 2013 Share Posted September 6, 2013 I have a clean 1.5.5 install and it works ok. have you tried setting debugging on and looked at the log files generated by the webserver ? I don't know yet where the session management is stored, some do this in de db, some on this. If this is on disk and the directory accordingly isn't writeable, then you get this behaviour too. phpinfo( ) shoud give some anwsers too about this. Link to comment Share on other sites More sharing options...
J.Sahu Posted September 6, 2013 Share Posted September 6, 2013 (edited) I'm not sure but have a look on the backoffice>>administration>>preferences>>General see the "Life time of back office cookie". If It is set to very less amount then increase it. Edited September 6, 2013 by J.Sahu (see edit history) 1 Link to comment Share on other sites More sharing options...
justbeer Posted September 6, 2013 Author Share Posted September 6, 2013 I'm not sure but have a look on the backoffice>>administration>>preferences>>General see the "Life time of back office cookie". If It is set to very less amount then increase it. Hi .. Thanks for the response. I don't see such a setting. However, I have reverted to previous version and the site is working again. Looks like there is some form of incompartibility with the server that my site is on. Tnx for the help. Link to comment Share on other sites More sharing options...
J.Sahu Posted September 6, 2013 Share Posted September 6, 2013 well I'm talking about the new version. I think u're using older one. anyway nice to listen that things are ok. Happy Time Link to comment Share on other sites More sharing options...
tunney Posted September 6, 2013 Share Posted September 6, 2013 I have the exact same problem right now. Someone please help! Link to comment Share on other sites More sharing options...
DocG Posted September 6, 2013 Share Posted September 6, 2013 If anyone want it.. Can anyone sent me a P.M. with an admin login, so i can see if i expireance the same problem and what a possible solution may be ? Keep in mind that the login should be of a site with a clean 1.5.5.0 install and accessible over internet. Link to comment Share on other sites More sharing options...
mbegunok Posted September 6, 2013 Share Posted September 6, 2013 I have the same issue Try to delete cache, cookies, different browsers -nothing help Link to comment Share on other sites More sharing options...
safa Posted September 6, 2013 Share Posted September 6, 2013 I'm not sure but have a look on the backoffice>>administration>>preferences>>General see the "Life time of back office cookie". If It is set to very less amount then increase it. everyone have to check this settings. for this problem. Link to comment Share on other sites More sharing options...
maximo88 Posted September 6, 2013 Share Posted September 6, 2013 480 minutes for my cookie Link to comment Share on other sites More sharing options...
mbegunok Posted September 6, 2013 Share Posted September 6, 2013 i have 480 in that field. what is the right number? It is under Administration Preferences Link to comment Share on other sites More sharing options...
safa Posted September 6, 2013 Share Posted September 6, 2013 yes 480 is a good number for cookies. first try to clear browser cache, and try diffrent browser. if problem not solve.open this fileconfig/defines.inc.phpand set @ini_set('display_errors', 'on'); Are you getting any error messages ? after this settings. Link to comment Share on other sites More sharing options...
tunney Posted September 7, 2013 Share Posted September 7, 2013 @safa, my cookie is at 480, tried your method, no errors shown and same problem still continues. Need urgent help on this! Link to comment Share on other sites More sharing options...
maximo88 Posted September 8, 2013 Share Posted September 8, 2013 I have activated debug mode and the problem is this: Redirection automatique dans 5 secondesindex.php?controller=AdminLogin&token=67d15b960bed9d7c7145261e264bc2ea&redirect=AdminHome Then I click return to enter again in the back office Redirection automatique dans 5 secondesindex.php?controller=AdminLogin&token=67d15b960bed9d7c7145261e264bc2ea&redirect=AdminHome And never I get inside my back office Link to comment Share on other sites More sharing options...
Nils-H Posted September 9, 2013 Share Posted September 9, 2013 I can't log into my backoffice anymore either. I enter my username/password, and then I get the same redirect message as above. I have cleared browser caches, so that's not the problem. Link to comment Share on other sites More sharing options...
germs Posted September 11, 2013 Share Posted September 11, 2013 I have the same problems. My installation procedures are described here: http://www.prestashop.com/forums/topic/271298-cant-login-as-admin-after-fresh-installing-version-1550/ If you did as I did and cannot log in to the BO - we are in the same boat! Link to comment Share on other sites More sharing options...
germs Posted September 11, 2013 Share Posted September 11, 2013 For those who failed to log in to the BO, are you on a VPS? Link to comment Share on other sites More sharing options...
joannaleng Posted September 11, 2013 Share Posted September 11, 2013 i had no choice to go back to 1.5.4..and end up..... my site is now like this: www.francescascloset.com it seems beyond repair. can't even go in by backoffice now Link to comment Share on other sites More sharing options...
germs Posted September 11, 2013 Share Posted September 11, 2013 Fortunately I did the upgrade on a test domain and it did not affect the going-to-be-live site. JoannaLeng, I had similar failures as yours (as you stated in your other posting) in that it became a mess after I did an upgrade (I) 1-click-upgrade (ii) manual upgrade (iii) fresh install. For the fresh install, I deleted the database as well. All was well except for the BO admin login. "Customers" can create and login on the test site. I think you may have to clean up your database, install old version and import database back, ++themes ....lots of long hours. I have another friend who is on a VPS and now for some reasons, she has same [Log In] at BO problems. Fortunately, her customers can login and make purchases! So, I am trying to get more information from others if most of this problem happened on a VPS. Link to comment Share on other sites More sharing options...
joannaleng Posted October 1, 2013 Share Posted October 1, 2013 Fortunately I did the upgrade on a test domain and it did not affect the going-to-be-live site. JoannaLeng, I had similar failures as yours (as you stated in your other posting) in that it became a mess after I did an upgrade (I) 1-click-upgrade (ii) manual upgrade (iii) fresh install. For the fresh install, I deleted the database as well. All was well except for the BO admin login. "Customers" can create and login on the test site. I think you may have to clean up your database, install old version and import database back, ++themes ....lots of long hours. I have another friend who is on a VPS and now for some reasons, she has same [Log In] at BO problems. Fortunately, her customers can login and make purchases! So, I am trying to get more information from others if most of this problem happened on a VPS. hi Germs, any luck? I am on bluehost, share hosting. Link to comment Share on other sites More sharing options...
germs Posted October 2, 2013 Share Posted October 2, 2013 Hi Joannaleng, My VPS is on WebVisions VPS. Linux with Plesk. Installed so many times on FRESH folder, and after deleting the database, just to be on the safe side - and yet no progress. Mycrypt was not enabled. There were some references to .htaccess file. Do you have further idea on this? Link to comment Share on other sites More sharing options...
joannaleng Posted October 2, 2013 Share Posted October 2, 2013 Hi germs, Not at all too! I'm with blue host on a share server. Did the same too, fresh install. New folder, delete database. I rem is, to have new htaccess file u juz need to delete it and presta will auto gen a new one. Link to comment Share on other sites More sharing options...
germs Posted October 3, 2013 Share Posted October 3, 2013 I am uploading this image here : http://sdrv.ms/1bsPppP I am wondering if the "cache" here means there is something wrong or it is normal. I have cleared whatever cache I can get rid of but the cache is still reflected. Link to comment Share on other sites More sharing options...
customUK Posted October 3, 2013 Share Posted October 3, 2013 Same here - upgraded to 1.5.5, now cannot log onto back office, So frustrating - anyone got any ideas ???? www.custom.uk.net Link to comment Share on other sites More sharing options...
Amy Posted October 3, 2013 Share Posted October 3, 2013 (edited) I'm having the same issue. I upgraded from 1.5.4 to 1.5.5 in the beginning of Sept. Everything worked find until I added SSL to my website. If I log in under the old admin log in page (using http:/) it seems to be okay. But when I log in to the updated admin log in page (using https:/) I'm contantly getting logged out. I cleared the cache and cookies and still have the problem. I was searching on-line for people with similar problems and found a suggested solution from a while ago, but the versions they are referring to are older. Wasn't sure how it would be and what to change in version 1.5.5. I've attached a screenshot of the advice. Please let me know if you require more information. Thanks, Amy Edited October 3, 2013 by Amy (see edit history) Link to comment Share on other sites More sharing options...
germs Posted October 4, 2013 Share Posted October 4, 2013 Hi Amy, I noticed that you are able to attach an image inline to the reply. I tried to but could only find a button for me to link an image. Briefly, how did you do the attachment, if you have the time 1 Link to comment Share on other sites More sharing options...
germs Posted October 4, 2013 Share Posted October 4, 2013 (edited) Hi all, I FOUND A SOLUTION! I managed to log in when I type "https://www.........." instead of just typing "http://www.....". or " www...." When I type https://www..... I got the usual caution certificate error....but proceeded anyway.....and I am in! It was tried on the Google Chrome browser..... Later, I have to re-install the CART back to country: Singapore as now it is in country: US Edited October 4, 2013 by germs (see edit history) 1 Link to comment Share on other sites More sharing options...
germs Posted October 4, 2013 Share Posted October 4, 2013 (edited) I checked my Server Setting: SSL Support [ / ] Use a single directory for housing [ / ] SSL and non-SSL content Is this the reason? Anyway, it worked for IE v 10. as well. Thanks, Amy as it was from your post that I somehow decided to give it another TRY Edited October 4, 2013 by germs (see edit history) 1 Link to comment Share on other sites More sharing options...
Amy Posted October 4, 2013 Share Posted October 4, 2013 Hi germs, For the image I hit "prt scr" and then went into Paint and pasted the image. I saved it as a jpeg and then attached it using the full editor mode with my reply. I'm glad to hear yours is working now. My issue is when I log in using the secured url (https), I keep getting logged off. But if I'm logged in using the unsecured url (http) it is okay. I would prefer to be able to be logged in using the secured url. Link to comment Share on other sites More sharing options...
germs Posted October 5, 2013 Share Posted October 5, 2013 (edited) Amy, Thanks for the tips! You mean you were logged off IMMEDIATELY or after a while? I think I might not be able to help you much - but if I have the same problem and found the solution, I will definitely post it here. Meanwhile, really wish you all the best. I am hoping the rest will reply so that I know if my solution is same as theirs .... Edited October 5, 2013 by germs (see edit history) Link to comment Share on other sites More sharing options...
Amy Posted October 5, 2013 Share Posted October 5, 2013 Hi germs, After I log in when I click to go into anything it logs me out. For example if I try to go into the modules, I would select modules and it would log me out. I log back in and I'm in the module section but then I click to configure a module and I'm logged back out. Link to comment Share on other sites More sharing options...
maximo88 Posted October 5, 2013 Share Posted October 5, 2013 Me the same and inmediatly. Link to comment Share on other sites More sharing options...
vekia Posted October 5, 2013 Share Posted October 5, 2013 Me the same and inmediatly. have you followed suggestions above in post: http://www.prestashop.com/forums/topic/272623-prestashop-155-admin-keeps-logging-off/page-2?do=findComment&comment=1404266 ? Link to comment Share on other sites More sharing options...
joannaleng Posted October 6, 2013 Share Posted October 6, 2013 Hi germs, u from Singapore too? It didn't work for me thouz with or so www Link to comment Share on other sites More sharing options...
maximo88 Posted October 6, 2013 Share Posted October 6, 2013 It's a problem of 1.5,5. Never in 1.5.4 The code of 1.5.5 is so bad. 1 Link to comment Share on other sites More sharing options...
Adrenalin Posted October 6, 2013 Share Posted October 6, 2013 (edited) I have this issue to. Specifically when I do this: Click on categories >>> Select 5 Categories to delete, press the delete button >>> boom, back to login screen. Edit: So been messing around, clicked on "Clear Smarty Cache" and was finally able to delete my Caterogies. Not to sure if this is a permanent fix but hey, at least it worked. For now. Edit again : Yeah still messed up. Annoying when you're working and it decides it's had enough. Can be 5seconds or 5min. Edited October 6, 2013 by Adrenalin (see edit history) Link to comment Share on other sites More sharing options...
germs Posted October 7, 2013 Share Posted October 7, 2013 (edited) Hi Jonnaleng, Yes. I am from Singapore. I just went in to the test domain and changed the Localization and Country to "Singapore". No error. I also installed the 1-click Upgrade module on this test domain. No auto-log out problem. ** ----------------------------- Seems stable for now. I am now planning how best to upgrade the current semi-Live 1.5.4.1 to the 1.5.5.0. Wish me all the best as I am not sure if the 1-click upgrade will work or not. To play safe, I will backup my database first. As for the "auto back to the login screen after click on a module" [ Adrenalin / Amy ] - I have not encountered it. But I did notice that previously, when I DID NOT set the [The PHP Safe mode" option to off ] the server will force OWNER/GROUP of "Apache/Apache" to some of the permanent files/folders and cache files. This caused the system to have strange problems like "nothing happens" when I tried something or "errors" to display when it all seems to be okay. I thought I only need to go through every single folder & file and change them back - but I missed a few of them .... which caused me more problems. I may have disabled the PHP Safe mode and change the various file ownership to "germs / psacln" BUT it worked for a while only as unknown to me somewhere else I again missed changing the rest of the files or directory ownership. Finally, to bring matter to a rest, I make sure the and DELETED everything (database and folders) and perform a FRESH prestashop installation. So, I do not have anymore strange, unexplained problems - except for the login issues (which is now solved). Hope this helps ..... Edited October 7, 2013 by germs (see edit history) Link to comment Share on other sites More sharing options...
Amy Posted October 8, 2013 Share Posted October 8, 2013 Hi germs, Good luck with your upgrade. Where did you go to turn the PHP to off? I wanted to check to see what my setting was at, but wasn't sure where to go. Link to comment Share on other sites More sharing options...
maximo88 Posted October 9, 2013 Share Posted October 9, 2013 1.5.6 doesn't resolve this problem yet Link to comment Share on other sites More sharing options...
germs Posted October 9, 2013 Share Posted October 9, 2013 Hi Amy, I configured it via the Plesk Panel's Web Hosting Settings: Link to comment Share on other sites More sharing options...
joannaleng Posted October 14, 2013 Share Posted October 14, 2013 did'nt help for me... so sticking to 1.5.4 for now.... Link to comment Share on other sites More sharing options...
Adrenalin Posted October 14, 2013 Share Posted October 14, 2013 Yeah 1.5.6.0 is even worse... CSV import doesn't work either. A whole new ballgame. Link to comment Share on other sites More sharing options...
Amy Posted October 14, 2013 Share Posted October 14, 2013 Thanks for the information, germs! I was actually able to solve my problem of constantly being logged off by going into Preferences and into SEO & URLs and clicking "yes" to disable apache mod security. Link to comment Share on other sites More sharing options...
maximo88 Posted October 15, 2013 Share Posted October 15, 2013 Yeah 1.5.6.0 is even worse... CSV import doesn't work either. A whole new ballgame. CSV IMPORT REPAIRED This is not a bug, Presta team have just remove the default separator fields and Múltiple value separator So, you have just to put ; for separator fields and , Multiple value separator http://www.prestashop.com/forums/topic/280064-la-version-156-de-prestashop-est-disponible/ Or the fix https://github.com/PrestaShop/PrestaShop/commit/df97566018ce7a101b727c9d450720e071c5e2cc 1 Link to comment Share on other sites More sharing options...
justbeer Posted October 15, 2013 Author Share Posted October 15, 2013 (edited) Thanks for the information, germs! I was actually able to solve my problem of constantly being logged off by going into Preferences and into SEO & URLs and clicking "yes" to disable apache mod security. Did this on a test site and immediately had a 500 Internal Server error. Be careful with this option. I am from Singapore as well ... installed Strong VPN for around US$50 and the backend works fine when VPN is running. I have tried solutions suggested earlier to amend the cookies.php file but this did not seem to work. Will be great is someone could point us to the files that need to be adjusted. Cheers! Edited October 15, 2013 by justbeer (see edit history) Link to comment Share on other sites More sharing options...
SmartDataSoft Posted October 20, 2013 Share Posted October 20, 2013 I have face same issue on 1.5.5 and also 1.5.6 Can be done 5min which take more than 30min Link to comment Share on other sites More sharing options...
tiagomiranda Posted November 9, 2013 Share Posted November 9, 2013 I'm having the same problem after migrating to a new server., can't log in BO, although password and email are correct, is there any other way to manage my orders? Link to comment Share on other sites More sharing options...
tiagomiranda Posted November 9, 2013 Share Posted November 9, 2013 (edited) I finally found a solution to my problem! Source Updated 2011.07.02: Well there is one more reason that can cause this problem – PHP bug:https://bugs.php.net/bug.php?id=42523 This problem was also reported to PrestaShop:http://forge.prestashop.com/browse/PSCFI-1110 If your PHP installation has this bug then $_SERVER['PHP_SELF'] variable will return the wrong value which is used in cookie path calculation.You can find this line in your admin folder/login.php file (54 line i PrestaShop 1.4.3.0):´ $cookie = new Cookie('psAdmin', substr($_SERVER['PHP_SELF'], strlen(__PS_BASE_URI__), -10)); Change this line to: $cookie = new Cookie('psAdmin', substr($_SERVER['SCRIPT_NAME'], strlen(__PS_BASE_URI__), -10)); It resolved the problem for me. Solved for me Edited November 9, 2013 by tiagomiranda (see edit history) Link to comment Share on other sites More sharing options...
vekia Posted November 9, 2013 Share Posted November 9, 2013 hello thank you for this solution, i'm worried about fact, that it will not work in 1.5.x releases Link to comment Share on other sites More sharing options...
Bejo Posted November 10, 2013 Share Posted November 10, 2013 i don't why after upgrade google map and autobackup i can not login prestashop admin123 anymore, usally i could do it. it said page not found. already check admin folder on cpanel and clear manual cache on cpanel but stilll can not login admin prestashop 1.5.4 anybody can help me? Link to comment Share on other sites More sharing options...
joaofilipe Posted November 26, 2013 Share Posted November 26, 2013 (edited) Hi guys, what happens to me is after installation I get a message from server that I'm not authorized to go to both urls front and back office but after i type url with www i can get both pages. The front is ok I can see shop. Unfortunately in BO I can't log in although password and user are correct. Version is 1.5.6.1 I´ve been around forum and still no solution... bit difficult to manage a shop without BO... sad... Edited November 26, 2013 by joaofilipe (see edit history) Link to comment Share on other sites More sharing options...
RescueDog Posted December 17, 2013 Share Posted December 17, 2013 I've had a *running* 1.5.5.0 instance for months and now, out of nowhere, I am getting booted from my back office and my login credentials are not working. I have purposely NOT made any changes or attempted any further upgrades to my shop - as it always ends in disaster! I was able to log in this morning and print new orders. Now, I attempt to go back into update order status for my clients and I am directed to the admin login and then in an "unknown employee" loop! A new message DID appear this morning stating that my shop wasn't pointing to the "www" version (no idea).So, in addition to needing help getting back into my shop, can someone also direct me to disengaging ANY and ALL of these "monitoring" messages that decide I suddenly have an issue and blast my shop away?? ...smh... just when I thought the nightmares were over!~Jowww.knightsshop.com PS 1.5.5.0 shared hosting Link to comment Share on other sites More sharing options...
vekia Posted December 17, 2013 Share Posted December 17, 2013 hello sometimes cases like that are related to browser cache problems. have you tried to clear browser cache, or just on different browser? Link to comment Share on other sites More sharing options...
RescueDog Posted December 17, 2013 Share Posted December 17, 2013 hello sometimes cases like that are related to browser cache problems. have you tried to clear browser cache, or just on different browser? Hi Vekia - I've cleared cache and tried FF, IE, Chrome - all result in same error. "Employee does not exist or password provided is incorrect" - using admin@_____ and the same password I've always used. Link to comment Share on other sites More sharing options...
El Patron Posted December 17, 2013 Share Posted December 17, 2013 call your hosting company, also search using hosting company name...see if anyone else is having similar experience...as this may be outside of ps sometimes they like to change things underneath, like add cache or something...ask them if they enabled varnish cache for example... Link to comment Share on other sites More sharing options...
RescueDog Posted December 18, 2013 Share Posted December 18, 2013 call your hosting company, also search using hosting company name...see if anyone else is having similar experience...as this may be outside of ps sometimes they like to change things underneath, like add cache or something...ask them if they enabled varnish cache for example...sadly my hosting sadly my hosting company has terrible support. I tried setting up a VPS but couldn't get any PS help to get thru the PS install that kept failing. I'm really frustrated. I finally had a shop and customers with orders coming in! I have a Holiday special I was going to announce and now I can't because I have no access to the back office! I have no idea what to do anymore. So frustrated. Should it be so easy to break? - especially when I've done NOTHING to the code or environment for 2+ months? sigh... Link to comment Share on other sites More sharing options...
El Patron Posted December 18, 2013 Share Posted December 18, 2013 sadly my hosting company has terrible support. I tried setting up a VPS but couldn't get any PS help to get thru the PS install that kept failing. I'm really frustrated. I finally had a shop and customers with orders coming in! I have a Holiday special I was going to announce and now I can't because I have no access to the back office! I have no idea what to do anymore. So frustrated. Should it be so easy to break? - especially when I've done NOTHING to the code or environment for 2+ months? sigh... sorry to hear of these issues and I agree that is very frustrating. From your hosting control panel can you find the error log? If so recreate the logging out problem and then look at the hosting error log. There may be some good information here that can help. 1 Link to comment Share on other sites More sharing options...
aloynium Posted December 21, 2013 Share Posted December 21, 2013 hi, I have a similar problem. Why does the Varnish create such a problem in prestashop? Considering this, I might actually change my host. Link to comment Share on other sites More sharing options...
georgetony Posted December 28, 2013 Share Posted December 28, 2013 Hi, I'm new to PS and just had the same issue with version 1.5.6.1. It keeps logging me out from the BO. The clear cache and so on didn't help in my case. Hosting: Linux VPS with LAMP. This is what fixed it for the time being: After you login to the BO, quickly go to: Administration > Preferences Then look for the setting: Check the IP address on the cookie. This is set to 'Yes' by default. Change it to 'No' and save. Screenshot after the change: http://awesomescreenshot.com/025257nuee This is a temporary solution. Not a good idea if you are already on a live shopping cart due to the security risk. If anyone finds a better solution, please update. Haven't played around with the source code, so not sure what exactly is the issue. (My ip address is not changing that often. So in theory, this change shouldn't have any effect on this issue.) 2 Link to comment Share on other sites More sharing options...
Zign Posted February 21, 2014 Share Posted February 21, 2014 I might have found a solution. In PrestaShop 1.5.6 I could not log in into the backend when a non-English language has been selected in the store frontend. After selecting English as store language I could login again into the backend. In Localization > Localization > Advanced I checked the server locale settings, which had been set into "Language locale: nl" and "Country locale: nl". After changing this into "Language locale: en" and "Country locale: us" this problem did not occur anymore. 1 Link to comment Share on other sites More sharing options...
alimx Posted February 23, 2014 Share Posted February 23, 2014 I might have found a solution. In PrestaShop 1.5.6 I could not log in into the backend when a non-English language has been selected in the store frontend. After selecting English as store language I could login again into the backend. In Localization > Localization > Advanced I checked the server locale settings, which had been set into "Language locale: nl" and "Country locale: nl". After changing this into "Language locale: en" and "Country locale: us" this problem did not occur anymore. Could not even change anything, after logged in everytime want to save something, it logged out again and it did not save anything. Link to comment Share on other sites More sharing options...
alimx Posted February 23, 2014 Share Posted February 23, 2014 Im sorry but if this helps anyone with the same problem Admin keeps logged out everytime logged in, I tell you what was wrong and the fix I did. PROBLEM : - I was using 2 different ISP on the same computer. Because of the WiFi connection was bad, so I change to mobile ISP and got the problem straight away. - Deleted cookies, cleared caches and even delete browsing history for the past month didn't work. My Fix : - Get into my smartphone and login from there and change the Administration > Preferences. check the IP address on the cookie to NO I hope this will help anyone who has the same problem with me. I am now able to browse the BO normally. 2 Link to comment Share on other sites More sharing options...
nancy99 Posted March 17, 2014 Share Posted March 17, 2014 Hi, I installed Prestashop 1.5.6.2. After I change Preferences->Images->PNG quality from 9(default) to 2, the system keeps logging out every time I click on other tab. I change the setting back to 9 and the problem solved. I am not sure why this happens. Link to comment Share on other sites More sharing options...
Macota Lorin Posted May 27, 2014 Share Posted May 27, 2014 (edited) I had the same problem and it began without warning. I asked my IT firm to check my login credentials and from where they loged in it worked without any problems but when I tried again to login, after 1 min I whas out. I found this other post: http://www.prestashop.com/forums/topic/2819.....e-menu/page-2 There, the Presta Team recomended to disable "Check the IP address on the cookie" in preferences. After I did this, my problem was solved! In order to check if that was the problem, I enabled the option again and after 1 min I was logged out. PrestaShop™ 1.5.5.0 Edited May 28, 2014 by Macota Lorin (see edit history) 1 Link to comment Share on other sites More sharing options...
Obioma Ezeri Posted August 26, 2014 Share Posted August 26, 2014 Hi guys. I'm having the same issue of being constantly logged out of the backoffice once I try to make any changes. I've read the solutions on this thread, but the issue is that even when I try to disable check for cookie ip address, I'm logged out also. And this also happens when I try to disable apache mod security. Who knows what I can do please? I've gotten in touch with my webhost and was told the issue would be with prestashop. Link to comment Share on other sites More sharing options...
Macota Lorin Posted August 26, 2014 Share Posted August 26, 2014 Hi guys. I'm having the same issue of being constantly logged out of the backoffice once I try to make any changes. I've read the solutions on this thread, but the issue is that even when I try to disable check for cookie ip address, I'm logged out also. And this also happens when I try to disable apache mod security. Who knows what I can do please? I've gotten in touch with my webhost and was told the issue would be with prestashop. Login from a diferent internet conection, one that you know has a static ip adress and then disable "Check the IP address on the cookie" in preferences. You can't save the changes now because the ip changes to quick. Hope this helps. Link to comment Share on other sites More sharing options...
Obioma Ezeri Posted August 28, 2014 Share Posted August 28, 2014 Thanks a lot Macota Lorin. I finally got to use a static ip connection and it worked. You really have been very helpful. Thanks. 1 Link to comment Share on other sites More sharing options...
Macota Lorin Posted August 28, 2014 Share Posted August 28, 2014 (edited) Thanks a lot Macota Lorin. I finally got to use a static ip connection and it worked. You really have been very helpful. Thanks. Glad I could help. Edited August 28, 2014 by Macota Lorin (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts