antalp Posted February 22, 2013 Share Posted February 22, 2013 Hi I paid £64 for this module and it doesnt work. Has anyone experienced problems with this module I emailed customer services but there has been no response? Link to comment Share on other sites More sharing options...
antalp Posted February 22, 2013 Author Share Posted February 22, 2013 (edited) gets this error Fatal error: Cannot pass parameter 2 by reference in /homepages/26/d105412566/htdocs/xxxxx/modules/bulkorders/bulkorders.php on line 179 SOLVED by Mammoo below, with thanks Edited March 4, 2013 by antalp (see edit history) Link to comment Share on other sites More sharing options...
Dh42 Posted February 22, 2013 Share Posted February 22, 2013 how long ago did you email them, what version of prestashop are you using? Link to comment Share on other sites More sharing options...
Carolina Custom Designs Posted February 22, 2013 Share Posted February 22, 2013 How long has it been since you contacted the module developer? If you used the Addons contact system I would try again. Often messages are not delivered correctly (or at all). Marty Shue Link to comment Share on other sites More sharing options...
antalp Posted February 23, 2013 Author Share Posted February 23, 2013 (edited) I will try again, I think the first message was sent on Tuesday, 4 days ago. Using version 1.5.2.0 Edited February 23, 2013 by antalp (see edit history) Link to comment Share on other sites More sharing options...
2pass Posted February 24, 2013 Share Posted February 24, 2013 (edited) Bonjour, J'ai éxactement le même problème que "Antalp" J'utilise la version 1.4 du module "BULKORDER" Je suis sur Prestashop 1.5.3.1 et voici mon erreur : [PrestaShop] Fatal error in module bulkorders: Cannot pass parameter 2 by reference Quelqu'un à la solution à mon problème ? Je vous remerci par avance. Edited February 24, 2013 by 2pass (see edit history) Link to comment Share on other sites More sharing options...
antalp Posted February 26, 2013 Author Share Posted February 26, 2013 (edited) Still no contact from Prestashop, I will try contacting the developer, translated the above post, seems 2pass has the same issue, anyone else experiencing a problem with this module? Edited February 26, 2013 by antalp (see edit history) Link to comment Share on other sites More sharing options...
mammoo Posted February 28, 2013 Share Posted February 28, 2013 I haven't fully tested this yet but for a very quick fix - change line 179 to the following: $history->changeIdOrderState($newOrderStatusId, $id_order); It doesn't give the error any more and it appears to have updated the order status ok but I'm going to do some more testing. It would be good if the developer releases a proper fix for this soon. 1 Link to comment Share on other sites More sharing options...
antalp Posted March 1, 2013 Author Share Posted March 1, 2013 Prestashop have told me they are waiting to hear from the developer. Last week I downloaded module v1.4 and I now notice there is a v1.6 Obviously I am not going to pay for an upgrade especially if this issue may not have been addressed. I will definitely try your fix, thank you! Please post your test results when you finished. Link to comment Share on other sites More sharing options...
2pass Posted March 2, 2013 Share Posted March 2, 2013 Bonjour, La solution de mammoo est nickel !!! Je la renote : $history->changeIdOrderState($newOrderStatusId, $id_order); Quand un dev répond plus vite que l'ombre de l'équipe de prestashop... loll Merci Link to comment Share on other sites More sharing options...
antalp Posted March 4, 2013 Author Share Posted March 4, 2013 Mammoo, Thank you very much, you are a genius! Works very well. Once again many thanks Ant. Link to comment Share on other sites More sharing options...
Arafat Jahan Posted April 5, 2013 Share Posted April 5, 2013 Getting the same error after paid 64 pound, shame on the developer and prestashop who cannot even check the module for install. Link to comment Share on other sites More sharing options...
Carolina Custom Designs Posted April 5, 2013 Share Posted April 5, 2013 Did you try to solution posted above? Marty Shue Link to comment Share on other sites More sharing options...
Yaku Posted April 20, 2013 Share Posted April 20, 2013 mammoo, thank you very much! It's working Comme vous tous, j'avais contacté le support et.... comme vous tous, c'est ici que j'ai trouvé la solution! Merci beaucoup. Link to comment Share on other sites More sharing options...
Yaku Posted April 20, 2013 Share Posted April 20, 2013 Pour info, j'ai constaté un autre bug, moins gênant que le précédent. En mode multiboutique, je sélectionne une boutique dans le selecteur de boutiques mais le module continue d'afficher les commandes de toutes les boutiques et pas seulement de la boutique sélectionnée. Je n'ai pas encore cherché à corriger ce problème pour le moment. Link to comment Share on other sites More sharing options...
fifidj75 Posted May 10, 2013 Share Posted May 10, 2013 (edited) On PS 1.4.9 the module doesn' work*. I have no error message but when I want to configurate nothing happens... Sur PS 1.4.9, le module ne fonctionne pas. Je n'ai pas de message d'erreur, par contre quand je vais sur "configurer", j'ai une page blanche. J'ai la version 1.4 du module et j'ai testé la modif ci-dessus dans le fichier bulkorders.php... Si quelqu'un a une idée. J'ai contacté le développeur, si j'ai une réponse je la posterai ici. Edited May 11, 2013 by fifidj75 (see edit history) Link to comment Share on other sites More sharing options...
fifidj75 Posted May 11, 2013 Share Posted May 11, 2013 Réponse du développeur qui m'a donné une version qui fonctionne pour les versions PS 1.4. Link to comment Share on other sites More sharing options...
.png.022b5452a8f28f552bc9430097a16da2.png)
Recommended Posts