itcwebman Posted August 30, 2012 Share Posted August 30, 2012 Hello everyone, Hopefully somone has got a quick answer to my problem! I want to upgrade my shop (currently using 1.4.6.2) to 1.4.9, but I don't know what 3rd party modules may not be compatible with this. Is there anyway that I can run a check? Thanks in antcipation Richard Link to comment Share on other sites More sharing options...
Dh42 Posted August 30, 2012 Share Posted August 30, 2012 You might have better luck contacting the module makers. They will know for sure. 1 Link to comment Share on other sites More sharing options...
rturner Posted August 30, 2012 Share Posted August 30, 2012 I agree with DesignHaus42. But when you upgrade, there is an option to disable 3rd party modules during the upgrade. Then when finished you can re-enable them one at a time. At that point, if a critical module doesn't work, just undo the upgrade using Autoupgrade. You'll be back to 1.4.6. 2 Link to comment Share on other sites More sharing options...
shokinro Posted August 31, 2012 Share Posted August 31, 2012 There is not big architecture changes between 1.4.9 and 1.4.6, most modules working at 1.4.6.2 should be still working on 1.4.9. But like DH said, it is better to contact the author of the module to get confirmed. 1 Link to comment Share on other sites More sharing options...
itcwebman Posted August 31, 2012 Author Share Posted August 31, 2012 Many thanks guys, I'll give it a go. Link to comment Share on other sites More sharing options...
Dh42 Posted August 31, 2012 Share Posted August 31, 2012 What module are you talking about by the way? Link to comment Share on other sites More sharing options...
Recommended Posts