RuntimeException in PhpDumper.php line 1403

[ezigo36]

Hello everyone!

I tried to upgrade to the latest version of prestashop but things didn't go well. As a result, I rolled back the files and the database to a previous restore point.

The front-end works great but I cannot access the back-office (blank page). I turned on debug mode and this is what i get:

Any ideas?

[PCQUATRO]

On 11/4/2019 at 11:40 AM, ezigo36 said:

Hello everyone!

I tried to upgrade to the latest version of prestashop but things didn't go well. As a result, I rolled back the files and the database to a previous restore point.

The front-end works great but I cannot access the back-office (blank page). I turned on debug mode and this is what i get:

Any ideas?

Clear the shops cache...

And if that doesn´t do it, delete /var/cache/prod/* using FTP cliente...

Best regards

[friweb99]

I can't access to BO

I'd clear cache using FTP but nothing change...

[PCQUATRO]

Try to enter debug mode by following this post -> 

Essentialy, using FTP Client,  you have to go to /config/defines.inc.php and change this line define('_PS_MODE_DEV_', false); to this define('_PS_MODE_DEV_', true);

Sorry i forgot you have already done that try to comment the line it mentions 1403, or even rename phpdumper.php...

Also read this -> https://blog.floriancourgey.com/2018/04/understanding-the-cache-of-prestashop-1-7-and-symfony/

Remember Allways BACKUP first...

How did you restore to a previous version?? over the current files?? or you deleted the files than copied them back?

you should also read this -> 

Best regards

Edited November 5, 2019 by PCQUATRO (see edit history)

[friweb99]

I'd comment line 1403 and everything works!!!!
You saved my life
Could I will have problems without this line?

Thx a lot

[PCQUATRO]

40 minutes ago, friweb99 said:

I'd comment line 1403 and everything works!!!!
You saved my life
Could I will have problems without this line?

Thx a lot

Nice.

As for the question i don´t know the answer for that. What i do know is that if you intend to upgrade your shop i´d suggest a clean install, than migrate the shop for the new install. it´s allways better to do a fresh install… Or you can clone your shop into a subdomain than do your upgrade there, never in a live shop...

Best Regards

[friweb99]

ok thanks again

[Armando027160]

Hello, I am from France and I have exactly the same problem line 1403. But I do not understand what to do when you say:

"I'd comment line 1403"

What exactly are you doing at this line? thank you for your comeback

Armando

[PCQUATRO]

2 hours ago, Armando027160 said:

What exactly are you doing at this line? thank you for your comeback

Use Comment tags -> /* code */

Best regards

[NamaRawras]

On 11/5/2019 at 9:26 PM, PCQUATRO said:

Try to enter debug mode by following this post -> 

Essentialy, using FTP Client,  you have to go to /config/defines.inc.php and change this line define('_PS_MODE_DEV_', false); to this define('_PS_MODE_DEV_', true);

Sorry i forgot you have already done that try to comment the line it mentions 1403, or even rename phpdumper.php...

Also read this -> https://blog.floriancourgey.com/2018/04/understanding-the-cache-of-prestashop-1-7-and-symfony/bpl

Remember Allways BACKUP first...

How did you restore to a previous version?? over the current files?? or you deleted the files than copied them back?

you should also read this -> 

Best regards

Debugging help a lot but once i messed up my shop and even debug did not help. Now, to be on the safe side i have always test the upgrade on separate install. 

[Armando027160]

17 hours ago, PCQUATRO said:

Use Comment tags -> /* code */

Best regards

Thank you for your return, but I'm a bit nil and do not understand what to register and where? here is my 1403 php line. If you could be a little more precise it would be nice.

[PCQUATRO]

3 hours ago, Armando027160 said:

Thank you for your return, but I'm a bit nil and do not understand what to register and where? here is my 1403 php line. If you could be a little more precise it would be nice.

If you don´t know what you are doing, it´s better not do it, you might do more arm than good!!!

Lets say you want to coment out the line that says "return 0 === strpos($class, '\\')…" you would do this "/* return 0 === strpos($class, '\\')… */"

If for instance it´s na if statemente you have to comment the all block.

Note: by your exxample i don´t know whitch one is line 1403!

Best Regards

[Jozef252]

Hello, 

Please help! I have the same issue but don't know how to comment 1403 line:

throw new RuntimeException(sprintf('Cannot dump definition because of invalid class name (%s)', $class ?: 'n/a')); 

Thank You.

 

 

Edited December 15, 2019 by Jozef252
uploading picture (see edit history)

[selectshop.at]

Commenting lines in php:

simply add /** to first line and */ to last line, or if it is only one line than begin the line with /** and add to end of line */

[Jozef252]

after adding :

simply add /** to first line and */ to last line, or if it is only one line than begin the line with /** and add to end of line */

 

I get tis error:

 

 

[Jozef252]

could you please specify what is first line and last line, i am very beginner. thank you.

[Jozef252]

I have solved issue with programmer help. thank you for help.

[Massimo333]

I have the same issue and I try to comment tjhe line 1403 but th problem is the same: how can I solve this problem?

[Jozef252]

commented line 1403:

/**   throw new RuntimeException(sprintf('Cannot dump definition because of invalid class name (%s)', $class ?: 'n/a'));  */

and deleted cache via ftp.

[libreriasemola]

Hallo PcQuatro

I did as you suggested, add a comment on line 1403, and it works.

I guess the problem was born when apdeting faceted navigation module on PS 1.7.3.1.

thank you

Corrado

[Looping59]

 

@ Jozef252  I have the same problem, I comenter the line in question which just changed my error message. Can you confirm that there are only the two files (dev / prod) in the CACHE folder of the APP folder to delete? Thank you for your help. 3 days that I seek ...

 

 

Edited January 27, 2020 by Looping59 (see edit history)

[JonnyMozzy]

yes, comment works. But im little bit nervous about PhpDumper.php:1403 what will be the aftermath, and what it this fuction doing.

[Saqib Ijaz]

RuntimeException in PhpDumper.php line 1403:Cannot dump definition because of invalid class name (NULL)

in PhpDumper.php line 1403

at PhpDumper->dumpLiteralClass('NULL') in PhpDumper.php line 790

at PhpDumper->addNewInstance('_defaults', object(Definition), 'return ', '$this->services['_defaults'] = ') in PhpDumper.php line 394

at PhpDumper->addServiceInstance('_defaults', object(Definition)) in PhpDumper.php line 639

at PhpDumper->addService('_defaults', object(Definition)) in PhpDumper.php line 666

at PhpDumper->addServices() in PhpDumper.php line 145

at PhpDumper->dump(array('class' => 'appDevDebugProjectContainer', 'base_class' => 'Container', 'namespace' => '', 'debug' => true, 'file' => '/home/interlinkcap/public_html/app/cache/dev/appDevDebugProjectContainer.php')) in bootstrap.php.cache line 2846

at Kernel->dumpContainer(object(ConfigCache), object(ContainerBuilder), 'appDevDebugProjectContainer', 'Container') in bootstrap.php.cache line 2759

at Kernel->initializeContainer() in bootstrap.php.cache line 2533

at Kernel->boot() in bootstrap.php.cache line 2564

at Kernel->handle(object(Request), '1', false) in index.php line 86

 

kindly help me out from this problem

 

 

[squito mantis]

Hello,

I am new to prestashop and i have come across the error runtimeexception in phpdumper.php line 1403.

can someone please tell me where to access this phpdumper.php file through cPanel?